Lubricant for treadmill POLYSILIC 1000 ml (2024)

Lubricant for treadmill POLYSILIC 1000

Especially suitable for lubricating treadmills and similar equipment. Excellent for both rubber and mechanical parts. Polysilic is an anti-adhesive silicone lubricant for rubber and plastics suitable for low and high temperatures. It improves sliding. Protects against moisture and acid solutions from skin sweat. Polysilic, thanks to its formulation, facilitates the sliding of the running belt on the deck by reducing friction and preserving motor life.

ADVANTAGES

• high quality Lubricant, made in Italy;
• Environmentally friendly,does not contain solvents, the spray action is mechanical unlike, unlike traditional sprays;
• high stability and durability of the product.

Features

APPEARANCE colourless fluid - Flash point 310°C - INSOLUBLE IN WATER
NET CONTENT: 1000 ml

METHOD OF USE

• No loosening of the running belt or other operation required.
• Lift the left-hand edge of the running belt and insert the straw between the tape and the platform trying to reach the middle and make a spray
• Repeat along the surface of the running belt at 5 equally spaced points
• Start the machine and walk for two / three minutes at low speed to spread the lubricant all over the deck
• Remove any excess silicone that may have settled on the side of the belt or on the frame

First aid measures.
The product is not considered hazardous according to EC Regulation 1272/2008 (CLP).
In case of skin contact: wash thoroughly with soap and water.
In case of contact with eyes: wash immediately with plenty of water and seek medical advice.
In case of ingestion: Do not induce vomiting under any circ*mstances. SEEK IMMEDIATE MEDICAL ATTENTION.
In case of inhalation: Take the injured person to fresh air and keep him warm and at rest.
Main symptoms and effects, both acute and delayed: None

It is recommended to print the current page as a reminder and keep the safety information with the lubricant as the lubricant comes in a neutral bottle.